Post by Admin on Jul 20, 2010 7:55:37 GMT -5
TWO & FOUR WHEEL DRIVE TRUCK AND TRACTOR PULL
Chairmen ¡ª Barry Bowers,
John Russell, John Reichley, Danny Fisher
Keith Luzadder
Friday ¡ª 5:00 p.m. Saturday ¡ª 5:00 p.m.
RULES:
Order of Pull:
Friday:
8,000 lbs. ¨C Pro Street Trucks (Diesel only)
6,500 lbs. ¨C Cheater Stock Truck (Gas only)
6,500 lbs. ¨C Modified Stock N/A Tractors
6,000 lbs. ¨C Nostalgic Modified V-8 Tractor N/A
6,200 lbs. ¨C Super Stock Trucks
6,350 lbs. ¨C Modified 4¡Á4 Trucks N/A
12,500 lbs. ¨C Farm Checked Tractors (4 m.p.h. limit)
14,500 lbs. ¨C Farm Checked Tractors (4 m.p.h. limit)
Saturday:
6,500 lbs. ¨C Pro Street Trucks (Gas only)
8,000 lbs. ¨C Cheater Stock Diesel 2.6 Turbo Limit (4¡Á4)
8,500 lbs. ¨C Hot Farm Tractors
5,200 lbs. ¨C Single Engine Modified Tractor (OMTPA)
6,200 lbs. ¨C Super Stock 4¡Á4 Trucks
Hot Semis
10,500 lbs. ¨C Limited Pro Tractor
12,500 lbs. ¨C Farm Tractor (3,000 rpm limit)
14,500 lbs. ¨C Farm Tractor (3,000 rpm limit)
Vehicles weigh before each pull.
1. 6,500 lbs. Pro Street Trucks (Gas only) ¨C Cast iron blocks only,
aluminum intakes, any cast iron or conventional type aluminum
cylinder heads permitted. No pro stock type cylinder heads, sheet
metal or tunnel ram intakes. No dry sump oiling systems. 585 cu. in.
limit. Dominator carbs permitted. No turbos, superchargers, injection,
EFI, split or dual carbs. Open headers permitted ¨C must exit down and
back. Engine must be same make as truck and back side of block must
be at least 15¡± behind center of front axle. Transmission, transfer case,
rear ends must be OEM, 1 ton or less. Heavy duty aftermarket drive
train parts can be used in OEM housing. Factory frames only ¨C no tube
chassis. Traction bars permitted. Solid or block suspension permitted.
Crew cab and ext. cab trucks permitted. Front weights and brackets
may not exceed more than 195¡± from center of rear axle. This
measurement is to compensate for longer wheel base trucks. Minimum
of 36¡± from center of rear axle and maximum height of 26¡±. Hitch may
be adjustable, but stationary in all directions. Cab must have factory
sheet metal and windows. Must have solid bed floor. Flatbeds are
permitted as long as they are factory built or heavier. Fiberglass hoods
and hood scoops permitted. Batteries and fuel tank must be in stock
location or in bed. Any street or D.O.T. tire. Maximum 36¡± tall x 16¡± wide.
No cut or sharpened tires. No nitrous or pressurized fuels. Pump gas
or racing gas only ¨C no alcohol or nitro permitted. Driveshaft loops, ujoint
shields, blowproof bellhousing or transmission blankets and kill
switches are required.
2. Super Stock 4¡Á4 Truck: Must follow Lucas Oil Super Stock Truck
rules.
3. 8,000 lb. Pro Street Trucks (Diesel only) ¨C This class is designed for
high performance 2 and 4 Wheel Drive trucks. Open driveline is
permitted. Fiberglass bodies and tube chassis frames are prohibited.
Engines must be OEM and available in one ton or less pickups. No
aftermarket heads or blocks permitted. No sigma injector pumps
permitted. Single chargers are unlimited. Limited twin charger set ups
are permitted. The inducer bore on the atmosphere charger is limited
to 3.2¡± A 3.25¡± plug will be used to tech these trucks. Bushings are
permitted. No nitrous, or propane. All tanks and lines must be removed
from trucks before competing. Front weights and brackets may not
exceed more than 60¡± from center of front axle. Solid rear suspension
and traction bars are permitted. Pulling type hitches are permitted,
hook point at least 36¡± behind the center of rear axle, max 26¡± high on
4 WD. Any D.O.T. approved tire permitted. No cutting or sharpening of
tires permitted. Safety requirements ¨C must have drive shaft loops and
u-joint shields on front and rear shafts. U-joint shields must be at least
3/8¡± thick aluminum or 1/4¡± thick steel. Blowproof bellhousings, or
blankets or bellhousing shields required. Air or fuel shut off kill switches
required. Smoke must exit straight up. Turn ups required on tail pipes.
4. 6350 lb. Modified 4¡Á4 Trucks N/A: will run Ohio Modified Tractor and
Truck Pullers rules.
5. Hot Semis- 20¡± Hitch Height maximum. NTPA approved hitch and
safety equipment. Must have own hitch.
6. 8,000 lbs. Cheater Stock 2.6 Diesel Truck ¨C Trucks can be trailered
in, but must meet the rest of our rules for the Cheater Stock diesel
class. Trucks competing in this class must be stock in appearance.
Engine and drive train must come factory in a 1 ton or less pickup. This
class is limited to a single charger. The inducer bore can¡¯t exceed
2.60¡±. This will be teched using a 2.65¡± plug. If the plug goes in you will
be disqualified. No reducers of any kind permitted to make a larger
turbo pass inspection. This also includes welding and remachining
inducer bore to make a larger turbo pass. The stock map width
enhancement (MWE) groove is allowed. No MWE groove wider than a
1/4¡± will be permitted. Twins are permitted as long as they are O.E.M.
for that truck. Diesel fuel and biodiesel are the only fuels permitted in
this class. Smoke must exit up through stacks or you will need a turn
up on your tail pipe. No exceptions!! Rear OEM style suspension
required. Solid susp. blocks and traction bars are permitted. Must pull
off of a reese type hitch, mounted solid to the frame with no movement.
Reinforcements permitted. Hooking point must be the furthest point
back of the truck and a maximum of 26¡± high on 4 WD trucks and 30¡±
on 2 WD trucks. Front weights and brackets can¡¯t exceed 60¡± from
center of front axle. Any D.O.T. approved tire is permitted. No cutting or
sharpening of tires permitted. No nitrous, propane, or any other
pressurized fuel permitted. Any tanks, lines or etc. must be removed
from truck before competing. Mandatory safety. All trucks must have 6¡±
long U-joint shields covering rear end yoke, rear output yoke, front
output yoke, and front end yoke. The front output yoke cover is not
required if lack of room prevents installation. Shield thickness
requirements aluminum min. 5/16¡± and steel min. 1/4¡±.
7. Cheater Stock Truck (Gas Only) ¨C No bar tread tires (not even D.O.T.
approved), all weights in bed of truck, must have same make of block
as vehicle manufacturer. License and registration is required at time of
entry, no dominator carbureators, no spare tires/snow plows frames/or
winches on front of truck, refab brush guards only, must have stock
front bumper, may have lift kit, ladder bars are allowed, no exotic spring
or frame modifications, no blocked suspensions, registration must
match the V.I.N. number on truck, 24 inch maximum hitch height (hitch
will be measured at attaching point of clevis), minimum of 48 inches to
center of rear axle, must pull from rear of reese hitch, all parts of hitch
must be behind rear axle, truck must weigh out after pull, must have
exhaust system with mufflers exiting behind cab, may be hauled in or
out, 33 inch maximum tire.
8. Mod Stock N.A. Tractors ¡ª Tires size 18.4 limit. Tractor must have
backup alarm. Tractor must have break away kill switch and deadman
throttle, must have wheelie bars. Must have scatter blanket. Side
shields required. Maximum drawbar height 20¡å. fire extinguisher must
be on tractor. No automotive V-8 engines. Helmet and seat belt
required. No nitrous. No Turbos.
9. Nostalgic Modified V-8 Tractor N/A ¨C 18¡± drawbar height. Must use
tractor rear end. Single engine. Single carburetor. 18.4-38 tire size limit.
10. Single Engine Modified Tractors ¨C Must follow Ohio Modified Truck
and Tractor Pullers rules.
11. Farm Checked Tractors ¨C No pressurized fuel unless factory
equipped. Maximum drawbar height 20¡± and 18¡± from center of axle
minimum. Must use factory drawbar. Wheelie bars recommended. No
side shields unless factory equipped. Factory RPM with working
governor. No more than 3000 RPMs. No cut or altered tires. 20.8 x 38
tire size limit. Weights must not interfere with hitch point. Tractor speed
limit of 4 m.p.h.
12. 12,500 and 14,500 lbs. Farm Tractors (3,000 rpm limit) ¨C Will folllow
Glenford rules.
13. Hot Farm Tractors ¨C Must have block for make of tractor. Maximum
drawbar 20¡± ¨C 18¡± minimum from center of axle. No pressurized fuel
unless factory equipped. No alcohol engines. Tire size limit ¨C 20.8 by
38. Must have tie bars, kill switch, wheelie bars, 3/8¡± safety cable on
front half of motor between cylinders 1 and 2, cross bolts in exhaust.
Roll bar or roll cage mandatory. No sigma pumps. One turbo only.
Scatter blanket, side shields, seat belt and helmet are mandatory.
14. Limited Pro Tractors ¨C Will folllow Hot Farm Tractor rules with 24.5
tire width limit.
15. All trucks must have closed doors. (No tire chains, studs or
dual wheels).
Judge¡¯s decisions will be final. Entrants under 18 years of age
must have written permission of parent or guardian.
Pull is ended when vehicle engine stalls, when forward motion
stops, or when vehicle loses weights, parts, or an excessive
amount of liquid.
All weights must be securely fastened. Trucks must be operated
in a safe manner at all times.
Entry fees are $25.00
One driver per truck. Pull will be held at the Perry County
Fairgrounds in the arena. Weighing will take place in the
compoundarea at the west end of the compound.
TRACTOR RULES
16. Weights must be securely fastened to the tractor.
Contest is open to tractors with rubber tires. No duals, four wheel
drives, tire studs, or chains allowed. Tire size limit of 20.8¡å for
stock tractors.
Entrants under 18 years of age must have written permission of
parents or guardian.
Only one driver for any tractor, per class. Drawbar to be stationary
in all directions. Drawbar height maximum 20¡å from top of hitching
device to ground.
Pull is ended when tractor engine stalls, when forward motion
stops, or when tractor loses weights, parts, or liquid from tires or
any part of the tractor.
Not responsible for injury, accidents, theft, loss, or damage to
articles.
Weight transfer sled will be used, pull starts at 5:00 p.m.
No alcoholic beverages allowed on the grounds. Law
enforcement provided.
Standard class safety equipment required.
Limited Pro Tractor, Hot Farm Tractor, Pro Street (gas),
Pro Street Diesel, Nostalgic V8 Tractor
1st¨C $350
2nd¨C $250
3rd¨C $200
4th¨C $150
5th¨C $100
Hot Semis
1st¨C $500
2nd¨C $350
3rd¨C $250
4th¨C $200
5th¨C $100
Stock NA Tractor
1st¨C $250
2nd¨C $200
3rd¨C $150
4th¨C $100
5th¨C $50
Farm Checked Tractors, Cheater Stock Diesel and Gas
1st¨C $150
2nd¨C $100
3rd¨C $75
4th¨C $50
5th¨C $25
Only one prize money per truck or tractor per class.
Chairmen ¡ª Barry Bowers,
John Russell, John Reichley, Danny Fisher
Keith Luzadder
Friday ¡ª 5:00 p.m. Saturday ¡ª 5:00 p.m.
RULES:
Order of Pull:
Friday:
8,000 lbs. ¨C Pro Street Trucks (Diesel only)
6,500 lbs. ¨C Cheater Stock Truck (Gas only)
6,500 lbs. ¨C Modified Stock N/A Tractors
6,000 lbs. ¨C Nostalgic Modified V-8 Tractor N/A
6,200 lbs. ¨C Super Stock Trucks
6,350 lbs. ¨C Modified 4¡Á4 Trucks N/A
12,500 lbs. ¨C Farm Checked Tractors (4 m.p.h. limit)
14,500 lbs. ¨C Farm Checked Tractors (4 m.p.h. limit)
Saturday:
6,500 lbs. ¨C Pro Street Trucks (Gas only)
8,000 lbs. ¨C Cheater Stock Diesel 2.6 Turbo Limit (4¡Á4)
8,500 lbs. ¨C Hot Farm Tractors
5,200 lbs. ¨C Single Engine Modified Tractor (OMTPA)
6,200 lbs. ¨C Super Stock 4¡Á4 Trucks
Hot Semis
10,500 lbs. ¨C Limited Pro Tractor
12,500 lbs. ¨C Farm Tractor (3,000 rpm limit)
14,500 lbs. ¨C Farm Tractor (3,000 rpm limit)
Vehicles weigh before each pull.
1. 6,500 lbs. Pro Street Trucks (Gas only) ¨C Cast iron blocks only,
aluminum intakes, any cast iron or conventional type aluminum
cylinder heads permitted. No pro stock type cylinder heads, sheet
metal or tunnel ram intakes. No dry sump oiling systems. 585 cu. in.
limit. Dominator carbs permitted. No turbos, superchargers, injection,
EFI, split or dual carbs. Open headers permitted ¨C must exit down and
back. Engine must be same make as truck and back side of block must
be at least 15¡± behind center of front axle. Transmission, transfer case,
rear ends must be OEM, 1 ton or less. Heavy duty aftermarket drive
train parts can be used in OEM housing. Factory frames only ¨C no tube
chassis. Traction bars permitted. Solid or block suspension permitted.
Crew cab and ext. cab trucks permitted. Front weights and brackets
may not exceed more than 195¡± from center of rear axle. This
measurement is to compensate for longer wheel base trucks. Minimum
of 36¡± from center of rear axle and maximum height of 26¡±. Hitch may
be adjustable, but stationary in all directions. Cab must have factory
sheet metal and windows. Must have solid bed floor. Flatbeds are
permitted as long as they are factory built or heavier. Fiberglass hoods
and hood scoops permitted. Batteries and fuel tank must be in stock
location or in bed. Any street or D.O.T. tire. Maximum 36¡± tall x 16¡± wide.
No cut or sharpened tires. No nitrous or pressurized fuels. Pump gas
or racing gas only ¨C no alcohol or nitro permitted. Driveshaft loops, ujoint
shields, blowproof bellhousing or transmission blankets and kill
switches are required.
2. Super Stock 4¡Á4 Truck: Must follow Lucas Oil Super Stock Truck
rules.
3. 8,000 lb. Pro Street Trucks (Diesel only) ¨C This class is designed for
high performance 2 and 4 Wheel Drive trucks. Open driveline is
permitted. Fiberglass bodies and tube chassis frames are prohibited.
Engines must be OEM and available in one ton or less pickups. No
aftermarket heads or blocks permitted. No sigma injector pumps
permitted. Single chargers are unlimited. Limited twin charger set ups
are permitted. The inducer bore on the atmosphere charger is limited
to 3.2¡± A 3.25¡± plug will be used to tech these trucks. Bushings are
permitted. No nitrous, or propane. All tanks and lines must be removed
from trucks before competing. Front weights and brackets may not
exceed more than 60¡± from center of front axle. Solid rear suspension
and traction bars are permitted. Pulling type hitches are permitted,
hook point at least 36¡± behind the center of rear axle, max 26¡± high on
4 WD. Any D.O.T. approved tire permitted. No cutting or sharpening of
tires permitted. Safety requirements ¨C must have drive shaft loops and
u-joint shields on front and rear shafts. U-joint shields must be at least
3/8¡± thick aluminum or 1/4¡± thick steel. Blowproof bellhousings, or
blankets or bellhousing shields required. Air or fuel shut off kill switches
required. Smoke must exit straight up. Turn ups required on tail pipes.
4. 6350 lb. Modified 4¡Á4 Trucks N/A: will run Ohio Modified Tractor and
Truck Pullers rules.
5. Hot Semis- 20¡± Hitch Height maximum. NTPA approved hitch and
safety equipment. Must have own hitch.
6. 8,000 lbs. Cheater Stock 2.6 Diesel Truck ¨C Trucks can be trailered
in, but must meet the rest of our rules for the Cheater Stock diesel
class. Trucks competing in this class must be stock in appearance.
Engine and drive train must come factory in a 1 ton or less pickup. This
class is limited to a single charger. The inducer bore can¡¯t exceed
2.60¡±. This will be teched using a 2.65¡± plug. If the plug goes in you will
be disqualified. No reducers of any kind permitted to make a larger
turbo pass inspection. This also includes welding and remachining
inducer bore to make a larger turbo pass. The stock map width
enhancement (MWE) groove is allowed. No MWE groove wider than a
1/4¡± will be permitted. Twins are permitted as long as they are O.E.M.
for that truck. Diesel fuel and biodiesel are the only fuels permitted in
this class. Smoke must exit up through stacks or you will need a turn
up on your tail pipe. No exceptions!! Rear OEM style suspension
required. Solid susp. blocks and traction bars are permitted. Must pull
off of a reese type hitch, mounted solid to the frame with no movement.
Reinforcements permitted. Hooking point must be the furthest point
back of the truck and a maximum of 26¡± high on 4 WD trucks and 30¡±
on 2 WD trucks. Front weights and brackets can¡¯t exceed 60¡± from
center of front axle. Any D.O.T. approved tire is permitted. No cutting or
sharpening of tires permitted. No nitrous, propane, or any other
pressurized fuel permitted. Any tanks, lines or etc. must be removed
from truck before competing. Mandatory safety. All trucks must have 6¡±
long U-joint shields covering rear end yoke, rear output yoke, front
output yoke, and front end yoke. The front output yoke cover is not
required if lack of room prevents installation. Shield thickness
requirements aluminum min. 5/16¡± and steel min. 1/4¡±.
7. Cheater Stock Truck (Gas Only) ¨C No bar tread tires (not even D.O.T.
approved), all weights in bed of truck, must have same make of block
as vehicle manufacturer. License and registration is required at time of
entry, no dominator carbureators, no spare tires/snow plows frames/or
winches on front of truck, refab brush guards only, must have stock
front bumper, may have lift kit, ladder bars are allowed, no exotic spring
or frame modifications, no blocked suspensions, registration must
match the V.I.N. number on truck, 24 inch maximum hitch height (hitch
will be measured at attaching point of clevis), minimum of 48 inches to
center of rear axle, must pull from rear of reese hitch, all parts of hitch
must be behind rear axle, truck must weigh out after pull, must have
exhaust system with mufflers exiting behind cab, may be hauled in or
out, 33 inch maximum tire.
8. Mod Stock N.A. Tractors ¡ª Tires size 18.4 limit. Tractor must have
backup alarm. Tractor must have break away kill switch and deadman
throttle, must have wheelie bars. Must have scatter blanket. Side
shields required. Maximum drawbar height 20¡å. fire extinguisher must
be on tractor. No automotive V-8 engines. Helmet and seat belt
required. No nitrous. No Turbos.
9. Nostalgic Modified V-8 Tractor N/A ¨C 18¡± drawbar height. Must use
tractor rear end. Single engine. Single carburetor. 18.4-38 tire size limit.
10. Single Engine Modified Tractors ¨C Must follow Ohio Modified Truck
and Tractor Pullers rules.
11. Farm Checked Tractors ¨C No pressurized fuel unless factory
equipped. Maximum drawbar height 20¡± and 18¡± from center of axle
minimum. Must use factory drawbar. Wheelie bars recommended. No
side shields unless factory equipped. Factory RPM with working
governor. No more than 3000 RPMs. No cut or altered tires. 20.8 x 38
tire size limit. Weights must not interfere with hitch point. Tractor speed
limit of 4 m.p.h.
12. 12,500 and 14,500 lbs. Farm Tractors (3,000 rpm limit) ¨C Will folllow
Glenford rules.
13. Hot Farm Tractors ¨C Must have block for make of tractor. Maximum
drawbar 20¡± ¨C 18¡± minimum from center of axle. No pressurized fuel
unless factory equipped. No alcohol engines. Tire size limit ¨C 20.8 by
38. Must have tie bars, kill switch, wheelie bars, 3/8¡± safety cable on
front half of motor between cylinders 1 and 2, cross bolts in exhaust.
Roll bar or roll cage mandatory. No sigma pumps. One turbo only.
Scatter blanket, side shields, seat belt and helmet are mandatory.
14. Limited Pro Tractors ¨C Will folllow Hot Farm Tractor rules with 24.5
tire width limit.
15. All trucks must have closed doors. (No tire chains, studs or
dual wheels).
Judge¡¯s decisions will be final. Entrants under 18 years of age
must have written permission of parent or guardian.
Pull is ended when vehicle engine stalls, when forward motion
stops, or when vehicle loses weights, parts, or an excessive
amount of liquid.
All weights must be securely fastened. Trucks must be operated
in a safe manner at all times.
Entry fees are $25.00
One driver per truck. Pull will be held at the Perry County
Fairgrounds in the arena. Weighing will take place in the
compoundarea at the west end of the compound.
TRACTOR RULES
16. Weights must be securely fastened to the tractor.
Contest is open to tractors with rubber tires. No duals, four wheel
drives, tire studs, or chains allowed. Tire size limit of 20.8¡å for
stock tractors.
Entrants under 18 years of age must have written permission of
parents or guardian.
Only one driver for any tractor, per class. Drawbar to be stationary
in all directions. Drawbar height maximum 20¡å from top of hitching
device to ground.
Pull is ended when tractor engine stalls, when forward motion
stops, or when tractor loses weights, parts, or liquid from tires or
any part of the tractor.
Not responsible for injury, accidents, theft, loss, or damage to
articles.
Weight transfer sled will be used, pull starts at 5:00 p.m.
No alcoholic beverages allowed on the grounds. Law
enforcement provided.
Standard class safety equipment required.
Limited Pro Tractor, Hot Farm Tractor, Pro Street (gas),
Pro Street Diesel, Nostalgic V8 Tractor
1st¨C $350
2nd¨C $250
3rd¨C $200
4th¨C $150
5th¨C $100
Hot Semis
1st¨C $500
2nd¨C $350
3rd¨C $250
4th¨C $200
5th¨C $100
Stock NA Tractor
1st¨C $250
2nd¨C $200
3rd¨C $150
4th¨C $100
5th¨C $50
Farm Checked Tractors, Cheater Stock Diesel and Gas
1st¨C $150
2nd¨C $100
3rd¨C $75
4th¨C $50
5th¨C $25
Only one prize money per truck or tractor per class.